Table of Contents
Advertisement
be continually repeated until the Disc Repeat mode is canceled by
pressing the RPT button again or by activating the Scan or Shuffle
Play functions.
DISC/TRACK SHUFFLE PLAY (SHF)
When the SHF button is pressed, the SHF indication will appear
on the display panel and the tracks on the disc will be played in a
random, shuffled order. The Track Select button will also select
tracks in the shuffled order instead of the normal progression. The
Random Track mode can be canceled by pressing the SHF button
twice, or by activating the Scan or Repeat Play functions.
If a problem should develop while operating the CD changer, the following error codes may appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc unloading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of these error situations, try ejecting the CD magazine from the changer and make sure the discs are clean, undamaged, and
loaded correctly (refer to the Owner's Manual of the CD changer). Re-load the magazine and check for proper operation. You may
also try activating the RESET button
do not solve the problem, contact an approved warranty station near you for further assistance.
When the SHF button is pressed for 2 seconds, the DSF indication
will appear on the display panel and the discs in the magazine will
be played in a random, shuffled order, as well as the tracks on
each disc. After playing all tracks selected at random from a disc
in the magazine, the unit will select another disc at random and
play all the tracks on it in a random shuffled order. This will continue
from disc-to-disc until the Random Disc mode is canceled by
pressing the SHF button again or by activating the Scan or Repeat
Play functions.
CD CHANGER ERROR CODES
on the unit, but this will also erase the time and pre-set memories. If the suggested measures
-12-
128-6864
12 of 16
Advertisement
Table of Contents
