Working Principle; Before Using Your New Ceramic Hob; Technical Specification; Operation Of Product - Axia A60-005 GL Instruction Manual / Installation Manual

Table of Contents

Advertisement

reliable performances, making your life comfortable and enabling to fully enjoy the pleasure from life.

2.4 Working Principle

This ceramic cooker hob directly employs resistance wire heating, and adjust
the output power by the power regulation with the touch controls.

2.5Before using your New Ceramic Hob

Read this guide, taking special note of the 'Safety Warnings' section.
Remove any protective film that may still be on your ceramic hob.

2.6Technical Specification

Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size D×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.

3. Operation of Product

3.1Touch Controls

The controls respond to touch, so you don't need to apply any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a
cloth)covering them. Even a thin film of water may make the controls difficult to operate.
A60-005 GL
4 Zones
220-240V~ 50/60Hz
5500-6600W
590X520X55
560X490
8

Advertisement

Table of Contents
loading

Table of Contents