Table of Contents
Advertisement
br br br br br
LOCAL (LOC) BUTTON
This feature is used to select the strength of
the signals at which the radio will stop during
Automatic Seek Tuning. Pressing the button
will select the Local setting (LOCAL will appear
on the display panel for 5 seconds and LOC
will remain in the center of the display) and
only strong (local) stations will be received.
Pressing and holding the button again will
select the Distant setting (Dx will appear on
the display panel for 5 seconds) and the radio
will stop at a wider range of signals, including
weaker (more distant) stations.
bs bs bs bs bs
LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the
frequency, time, and all activated functions.
NOTE: It is a characteristic of LCD panels that, if
subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal condi
tions. In addition, the visibility of the numbers
on the LCD may slightly decrease. The LCD
read-out will return to normal when the
temperature increases to a normal range.
bt bt bt bt bt
DISC SLOT
With the label surface facing up, gently insert the
disc into the slot until the soft-loading mechanism
engages and disc play begins. S--CDP will appear
momentarily ; the
indication will become ani-
mated, and CDP appears together with the track
number and elapsed time.
CAUTION: This unit is designed for play of stan-
dard 5" (12cm) Compact Discs ONLY.
Do not attempt to use 3" (8cm) CD-
Singles in this unit, either with or
without an adaptor, as damage to the
player and/or disc can occur. Such
damage will not be covered by the
Warranty on this product.
bu bu bu bu bu
MODE SELECTOR (MODE)
This button is used to select the radio, or the play-
back mode for the CD player. Each press of the
button will select a different mode as indi-
cated on the display panel.
During CD player operation, this button may
be used to change to radio without eject-
ing the disc (the CDP indication will remain
on the display panel to show that a disc is
still loaded in the unit). Press the button again
to return to integral CD player mode.
cl cl cl cl cl
TRACK SELECT (
The Track Select functions are used to
quickly access the beginning of a particular
track. Each time the Forward Track Select
(
) button is pressed, the next higher
track number will be selected as shown
on the display panel. Similarly, each time the
Backward Track Select (
pressed, the next lower track number will
be selected as shown on the display panel.
cm cm cm cm cm
CUE/REVIEW FUNCTIONS (
High-speed audible search to any section
of the disc can be made by the Cue and
Review functions. Press and hold the Cue
button (
) to advance rapidly in the for-
ward direction or the Review button (
advance rapidly in the backward direction.
During either function, the elapsed time
within each track will automatically be shown
on the display panel.
cn cn cn cn cn
DISC PAUSE (PAU) SELECT
The Pause function is used to freeze disc
play when the CD player is in use.
S--PAUSE will appear flashing on the display.
Press this button again to resume disc play;
the S--PAUSE indication will disappear.
co co co co co
TRACK SCAN SELECT (SCN)
During disc play, press this button to play the
first 10 seconds of each track on the disc
(S--SCN will appear on the display panel with
the track number). When a desired track is
reached, press the Track Scan button again
to cancel the function and play of the se-
lected track will continue. Track Scan mode
/
)
) button is
/
)
) to
9 9 9 9 9
Advertisement
Table of Contents
