Huawei SUN2000-15KTL-50KTL-M3 Series User Manual page 58

Replacing SUN2000-(15KTL-50KTL) Series with
SUN2000-(15KTL-50KTL)-M3 Series
User Manual
Figure 6-3 Routing the AC power cable




Step 3 (Optional) Crimp OT terminals.
Figure 6-4 Stripping the AC power cable
Step 4 Connect the AC output power cable (using a five-core cable as an example).
Issue 01 (2021-04-05)
OT terminals are shipped with the SUN2000 package. The delivered OT terminals apply only to
2 2
cables of 8 mm /10.0 mm (7 AWG/8 AWG). For other types of cables, you need to prepare OT
terminals.
In the SUN2000 V100R001 replacement scenario, you need to crimp OT terminals.
In the SUN2000 V200R001 replacement scenario, if the original AC power cable uses M6 OT
terminals, replace the terminals with the M8 OT terminals delivered in the package.
In the SUN2000 V200R001 replacement scenario, two types of AC wiring terminals are supported
(one long, one short). You can select a type based on the cable diameter.
Copyright © Huawei Technologies Co., Ltd.
6 Electrical Connections
51