Huawei SUN2000-15KTL-50KTL-M3 Series User Manual page 47

Replacing SUN2000-(15KTL-50KTL) Series with
SUN2000-(15KTL-50KTL)-M3 Series
User Manual
Figure 5-10 Mounting bracket dimensions
Procedure
Step 1 Install the new mounting brackets.
Issue 01 (2021-04-05)
 The mounting bracket has six groups of mounting holes, which are used to adjust the installation
height of the SUN2000.

In the SUN2000 V100R001 replacement scenario, it is recommended that the mounting bracket be
secured at hole 2. If it is difficult to connect cables at this height, select holes based on the original
cable length. The AC power cable length requirements should be preferentially met.
 In the SUN2000 V200R001 replacement scenario, it is recommended that the mounting bracket be
secured at hole 5. If it is difficult to connect cables at this height, select holes based on the original
cable length. The AC power cable length requirements should be preferentially met.
Copyright © Huawei Technologies Co., Ltd.
5 Installation
40