Secondary Camera Characteristics; User Interface; Display Module - Nokia 6120 classic Service Manual

Secondary camera characteristics

Sensor type
Sensor photo detectors (effective)
F number/Aperture
Focus range
Still image resolutions
Still images format
Video resolutions
Video clip length
Video file format
Exposure control
White Balance
Colours

User interface

Display module

Display module
The display in RM-243 is an active TFT QVGA display that supports up to 16.777.216 colors (320x240 pixels).
The interconnection between the LCD module and the engine is implemented with a 24-pin board-to-board
connector.
Page 6 –16
Figure 42 Camera flash and driver design
CMOS
384x320
2.8
25cm -> 1m
320x240
EXIF (.jpg)
176x144 or 128x96
30sec short mode or 1 hour free mode
3GPP, (*.3gp)
Automatic
Automatic
16.7 Million, 24bit
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
System Module and User Interface
RM-243
Issue 1