Power Block - LG KB770 Service Manual

3.8. Power Block

3.8.1. General
MSM6280, included RF, is fully covered by PM6650(Qualcomm PMIC). PM6650 cover the
power of MSM6280, MSM memory, RF block, Bluetooth, USIM and TCXO.
Major power components are :
PM6650(U503) : Phone power supply
MAX8645Y(Sub_U103) : LCD Backlight/Flash charge pump
3.8.2 PM6650
The PM6650 device (Figure 3.9.2) integrates all wireless handset power management. The
power management portion accepts power from all the most common sources – battery,
external charger, adapter, coin cell back-up – and generates all the regulated voltages
needed to power the appropriate handset electronics. It monitors and controls the power
sources, detecting which sources are applied, verifying that they are within acceptable
operational limits, and coordinates battery and coin cell recharging while maintaining the
handset electronics supply voltages. Eight programmable output voltages are generated using
low dropout voltage regulators, all derived from a common trimmed voltage reference.
A dedicated controller manages the TCXO warm-up and signal buffering, and key parameters
(under-voltage lockout and crystal oscillator signal presence) are monitored to protect against
detrimental conditions.
MSM device controls and statuses the PM6650 IC using Single Serial Bus Interface (SSBI)
supplemented by an Interrupt Manager for time-critical information. Another dedicated IC
Interface circuit monitors multiple trigger events and controls the power-on sequence.
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 51 -
3. TECHNICAL BRIEF
LGE Internal Use Only