Table of Contents
Advertisement
Confidential
8. Check the Specify a location check box then click Browse.
9. Insert the FD you made at step 3 into the floppy disk drive. Then select [TMUSB90.inf].
10. When the message [Search for driver files for the following hardware device. EPSON USB
Controller for TM Printer Series. Windows is now ready to install the best for this device?.] appears
as the figure 3-2, click Next. Then click Finish on the next window.
11. While the printer is on, open the device manager. If the [EPSON USB Controller for TM
Printer Series] exists on the Universal Serial BUS controllers, the installation is successful.
12. Select Setting from the Start menu; then select Printers.
13. Open the Property of the installed printer, and make the printer port setting to TMUSB000. If
you connect some printers, set the proper numbers. such as TMUSB001, 002.. .
14. Turn on the printer and start test printing. When the test printing is completed properly, the
installation is finished.
Rev. B
Figure 3-2
UB-U09 Developer's Guide
Software 3-3
Advertisement
Table of Contents
