Installation
TW-
IN-
INPUT
IN+
TW+
Crossover
When wiring the tweeter to the crossover the wire with the red line is + (Positive) and the plain
wire is - (Negative). This is the same with the connection to the amplifier or other source for
power.
Mounting Crossover
screw
bottomcap
screw
crossover
topcap
The crossover will allow the tweeter to play the correct frequencies without sending harmful low
frequencies to the tweeter. To mount the crossover find a sturdy location and used the supplies
crews to moutn the crossover to the surface you have chosen.
�