Easyone-Cs Lithium Battery Replacement; Background - NDD EasyOne-CS Field Service Manual

2030434-006 Rev. E

Confirm the summarized installation information by clicking on "Next >".

If button "Install FlashPlayer" is not visible the Macromedia FlashPlayer has also been installed
automatically. Confirm completion of installation by clicking on "Close".

Optional: On Windows Vista the FlashPlayer has to be installed manually (Macromedia Flash
Player must be installed on your system in order to display the pediatric animation). Click on
"Install FlashPlayer" if button is displayed.


Confirm installation by clicking on "Yes".


Click on "OK".

Your computer may need to be restarted during this installation procedure under certain
circumstances.

The SmartInstaller can be terminated by clicking on "Exit". Remove the CD from the drive.

An EasyWare icon will have been installed on your desktop after installation.

Launch EasyWare. When EasyWare is launched for the first time, you are prompted to choose
the language and enter the software serial number. Enter the software serial number that is
provided on the CD-ROM sleeve and then quit EasyWare.

13 EasyOne-CS Lithium Battery Replacement

This procedure is intended for use by trained electronic service technicians. It describes how to
exchange the internal Lithium battery.

13.1 Background

The internal Lithium battery of the EasOne-CS has a lifetime of more than 5 years (designed to last up
to 10 years). If the lithium battery is empty, the device shows an error #25 message. The battery is
needed to hold the date & time and parts of the device configuration information which is stored in the
RAM area of the RTC. If the battery is empty, this data is corrupt and leads to the above error. In this
case, it is necessary to change this battery.
EasyOne-CS Field Service Manual Page 21