Easyware Pc Software Installation - NDD EasyOne-CS Field Service Manual

2030434-006 Rev. E
11. The correct programming can be checked by pressing "Update Device Info" button and
validating "Firmware Version" and "CRC" information.
Troubleshooting:

If the programming of the software is interrupted: Turn the power of EasyOne-CS off and turn it
on again. Retry the programming procedure.

12 EasyWare PC Software Installation

You will require Administrator privileges to install the software. Proceed as follows:

Do not yet connect the ScreenConnector to the PC.

You will require Administrator privileges on the PC in order to install the software.

Quit all programs and insert the EasyWare CD into your CD ROM drive. The installation routine
should start automatically within 30 seconds of inserting the CD. If the installation routine does
not start automatically, switch to root directory on the CD-ROM and run the
"SmartInstallation.exe" program. You will then see the following window:
EasyOne-CS Field Service Manual Page 19