General Operation - AudioBahn AVDVD07N Operating Intstructions

Universal mount dvd player with remote control
Table of Contents

Advertisement

General Operation

DVD:
Normal playback
X2
VCD/CD/MP3:
Normal playback
X2
Slow Motion Playback (For DVD Only)
Press
/
during play.
Each time the button is pressed, the speed of
slow forward /reverse changes according to
the disc as follows.
DVD:
X1/32
X1/16
X1/8
In slow motion state, press
remote control to recover normal playback.
Skipping Track
Press
buttons on the remote control
/
or on the front panel during playback.
Press
to skip to the next track, and
press
to skip to the previous track.
Note: For some VCD2.0 discs
(PBC-playback control),
may be unavailable.
Mute
Press MUTE button to mute the sound, but
the disc continues playing. Press MUTE
again or press volume up/down buttons on
the front panel or on the remote control,
sound will resume.
Volume Level Adjustment
In DVD mode, press
panel or VOLUME +/- on the remote
control to increase or decrease the volume
level.
DVD VIDEO MENU PLAY
When playing a DVD disc in the DVD player:
1) The disc will be played automatically
and stop at menu picture.
2) Use
between the highlight bars in the menu.
X4
X16 X100
3) Press ENTER button or OK button to
confirm the selected item.
X4
X8
MODE SELECTION
Press SOURCE button on the front panel of
the unit or MODE button on the remote
control to select among DVD and AV mode.
When select one mode, the corresponding
indicator on the front panel will be
illuminated.
RESET FUNCTION
X1/4
X1/2
Reset button is placed on the front panel and
must be activated with either a ballpoint pen
on the
or thin metal object. The reset button is to be
activated for the following reasons:
-
Initial installation of the unit when all
wiring is completed.
-
All the function buttons do not operate.
-
Error symbol on the display.
buttons
/
LAST PLAY MEMORY
During disc playback, if you press
button to turn off the unit and then press
the button again to turn on the unit, the
DVD unit will resume playing from the
point that just interrupted.
During disc playback, press
eject the disc then load the disc into the
slot again, the unit will resume playing
from the point that just interrupted.
/
on the front
During disc playback, if you press
SOURCE button or MODE button to
switch to AV mode, then return to DVD
mode again, the unit will resume
playing from the point that just
interrupted.
19
/ , /
cursor buttons to move
button to

Advertisement

Table of Contents
loading

Table of Contents