AudioBahn AVDVD07N Operating Intstructions page 14

Installation
DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, Toyota or Suzuki,
follow these mounting instructions.
Use the screw holes marked T (Toyota), N
(Nissan) or S (Suzuki) located on both sides
of the unit to fasten the unit to the factory
radio mounting brackets supplied with your
vehicle.
Factory Radio
Mounting Bracket
Screw
Hook
To fasten the unit to the factory radio
mounting brackets.
1. Use a screwdriver to loose the hook's
screws on the front left and right sides of
the unit and remove the hooks.
2. Align the screw holes on the bracket
with the screw holes on the unit, and
then tighten the screws on each side.
3. Fasten with the supplied truss screws
(5x5mm) or flush surface screws
(4x5mm), depending on the shape of the
screw holes in the bracket.
Note: the outer trim ring, sleeve and the
metal strap are not used for method B
installation.
Side View showing
Screw Holes marked
T, N or S
Screw
Dashboard or Console