Tray loaded multi-format dvd player with remote (26 pages)
Summary of Contents for AudioBahn AVDVD1P
Page 1
QUALITY, RELIABILITY, & PURE BLISS UNIVERSAL MOUNT DVD PLAYER WITH REMOTE CONTROL AVDVD1P OPERATING INTSTRUCTIONS PLEASE RETAIN MANUAL FOR FUTURE USE AND REFERENCE...
Table of Contents Safety Information ... 5 Disc Notes ... 6 The Player ... 9 Front View...9 Back View ...10 Installa tion ...11 Electrical Connection ... 14 Remote Control... 15 Location and Function of Keys ... 15 Preparing the Remote Control... 17 General Operation...
Unit Introduction Digital Audio Out-Coaxial DVD Player Multi-subtitle Languages Function Multi-audio Languages Function Multi-angle Function Parental Control Remote Control �...
Features and Safety Use This Product Safely Do not expose the product to water or excessive moisture. This could cause electrical shorts, fire or other damage. When Driving Keep the volume level low enough to be aware of road and traffic conditions. When Parked Parking in direct sunlight can produce very high temperatures inside your vehicle.
The Player FRONT VIEW (POWER) (eject button) 3. MODE 4. AUDIO 5. Reset button 6. Disc Slot ( PLAY/PAUSE) STOP 11. VOL 12. VOL+ 13. AUDIO IN R 14. IR 15. Indicator Light for DVD 16. Indicator Light for STAND BY 17.
The Player BACK VIEW ANT IN 20. DC 12V INPUT Socket 21. DC 12V OUTPUT Socket 22. AV OUTPUT TYPE Switch 23. DIGITAL AUDIO 24. REMOTE Socket 25. S-VIDEO Socket 26. AUDIO/VIDEO OUTPUT 1 27. AUDIO/VIDEO OUTPUT 2...
Installation Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.
Page 13
Installation Sleeve L Key Outer Trim Ring 5. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so examine which ones will be most effective.
Page 14
Installation DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota or Suzuki, follow these mounting instructions. Use the screw holes marked T (Toyota), N (Nissan) or S (Suzuki) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle.
Electrical Connection �� ��� ����� AC/DC ADAPTO (OPTIONAL) Note: The S-VIDEO output is only effective on DVD, not effective on AV source. That is to say, the video signal of AV input source can’t be output from the S-VIDEO jack. Slide AV OUTPUT TYPE switch on the back of the unit left or right to select A or B.
Page 17
Remote Control POWER Press POWER to turn the unit ON or OFF. 2. MUTE Press to mute the sound. 3. SUB-T Changing of the SUBTITLE language on multi-subtitle language DVD disc. 4. ANGLE Changing of the view angle on multi-angle DVD disc. 5.
Remote Control Preparing the Remote Control Inserting the Batteries 1. Open the battery compartment cover. 2. Insert the new battery. Make sure that the positive and negative terminals of the battery are oriented as indicated. 3. Close the cover. Battery: one button cell lithium battery Using the Remote Control Face the remote control towards the player front face IR mark (remote control signal...
General Operation TURN THE UNIT ON After all connections are completed correctly, press the front panel or (POWER) on the remote control to turn on the power. When the unit is on, it will search the disc automatically. If there is a disc in the disc slot, the unit will start playback automatically.
General Operation DVD: Normal playback VCD/CD/MP3: Normal playback Slow Motion Playback (For DVD Only) Press during play. Each time the button is pressed, the speed of slow forward /reverse changes according to the disc as follows. DVD: X1/32 X1/16 X1/8 In slow motion state, press remote control to recover normal playback.
Advanced Operation REPEAT PLAY/ PARAGRAPH REPEAT PLAY Repeat play: when you want to repeat playing the whole disc or a track or a chapter in the disc. 1) Press REPEAT button repeatedly to select different repeat modes. 2) For different kinds of discs, pressing REPEAT button has different effects.
Page 22
Advanced Operation Item: Chapter Function: Display the current chapter number and total chapter number; it can skip to the desired chapter number. Method: buttons or use numeric buttons to input and confirm with ENTER or OK button. Item: Time Function: Display the elapsed time; you can input the time directly to the skip to the corresponding playback point.
Advance Operation Method: In PBC mode, it can’t be changed. In PBC OFF mode, use numeric buttons to input time and confirm with ENTER or OK button. Item: Audio Function: Display the current audio mode; it can switch to other audio mode.
Advanced Operation 2) Press ZOOM button again to zoom in the picture 16 times. 3) During zoom mode, pressing buttons will move pictures up, down, left or right direction in order to find the picture that you want to zoom in. 4) When the sale is 16 times, press ZOOM button again to cancel the ZOOM function.
Page 25
Advanced Operation When inserting a DVD disc, there is a window shown on the screen that requires entering 4 characters password, why? It is because that the current disc has “Parental Control” level, and the player’s parental level is set below the level of the disc, you should enter the correct password to play the disc normally.
Advanced Operation SPECIAL FUNCTIONS FOR VCD For VCD discs, there is one special function “Program Play” which makes it different from DVD discs. The function is effective in PBC OFF mode. In stop or pre-stop mode, press PROGRAM button can activate program edit interface.
Page 27
Advanced Operation When selecting the show) button in the middle area and pressing ENTER or OK to confirm, it will start to display all the pictures in full screen in turn. When show the picture in full screen, the control bar will be shown on the screen.
In the stop mode or when the disc is playing, press SETUP on the remote control or on the front panel to enter setup menu. When the cursor is on the topside, use buttons to move between the different pages. Press button to move the cursor to the setup page below and then you can...
Setup DISPLAY SETUP When you open the DISPLAY menu, you will see the following picture: “TV Aspect” is used to set the appropriate display effect when wide-screen video material is played on a conventional screen. There are two options to be selected: 4:3 and 16:9. When a wide-screen TV set is connected, you can select “16:9”...
Setup AUDIO SETUP When you open the AUDIO menu, you will see the following picture: “Dolby Digtial” means the Dolby digital out type. There are “Bitstream” and “PCM” to be selected. Bitstream: When connecting to the amplifier or other devices with the Dolby Digital Decoder, DTS Decoder or MPEG Decoder or other devices, select this item.
Setup LOCK SETUP When you open the LOCK setup page, you will see the following picture. “Rating” is used to set the parent control level. Prev. When you enter into this item, the system will require you to input the password, only the password is correct, can you be permitted to change the parent lock level.
Setup OTHERS SETUP When you enter into the OTHERS setup page, you will see the following picture. You can change the setting for Load Default and Screen Saver. Move Select “Load Default” is used to revert to factory initial settings. “Screen Saver”...
Troubleshooting If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player.
Specifications Supply voltage: Signal system: Discs played: Audio output level: Audio signal output characteristics: Note: Specifications and design are subject to modification, without notice, due to improvements in technology. This product incorporates copyright protection technology that is protected by method claims of certain U.S.
Dealer look at the product to confirm the source of the problem. Any product found to have a manufacturer defect will be replaced with a new piece of the same or similar model, or repaired at the discretion of Audiobahn. Any product found to have no manufacturer defect will be returned to the sender at their cost.
Need help?
Do you have a question about the AVDVD1P and is the answer not in the manual?
Questions and answers