Table of Contents
Advertisement
General Operation
TURN THE UNIT ON
After all connections are completed
correctly, press the
front panel or
(POWER) on the remote
control to turn on the power. When the unit
is on, it will search the disc automatically. If
there is a disc in the disc slot, the unit will
start playback automatically. Besides this,
you should turn on the monitor that
connected to the player.
Standby State
1) When the unit is on, press
on the front panel or
the remote control to turn the unit off
temporarily, in order to stop the
playback in a short time and the unit
goes into standby state.
2) In standby state, press
front panel or
(POWER) on the
remote control again to recall playback.
And for disc playback, it can realize
memory play function.
Note: The unit has screen saver function
(select "ON" in Screen Saver setup). If the
playback is stopped and there is not any
button operation in 5 minutes, it will activate
the screen saver function automatically;
when any button for DVD function is
pressed, the screen saver function will
release automatically.
Remote Sensor (IR)
Point the remote handset to the remote
sensor IR on the front panel. Receive the
signal from the remote handset.
Loading a Disc
1. Insert the disc with printed side facing up
into the disc slot.
2. The player will start playback
automatically.
(PWR) button on the
Ejecting a Disc
Press
the remote control to eject the disc.
BASIC PLAY
Stopping Playback
(PWR)
-
Briefly press
(POWER) on
pre-stop the unit playback. When
button on the front panel or
button on the remote control is pressed,
normal playback will continue.
(PWR) on the
-
Press
playback and go back to the DVD
LOGO.
Pausing Play/Step Play
Pressing
first time or pressing
during playback will stop playback
temporarily. To return to normal playback,
press
the front panel.
If you play a DVD/VCD/SVCD, press
the remote control again to stop at the next
picture (step function). If you play a
CD/MP3/Picture CD, pressing
remote control again is ineffective.
Rapid Forward / Rapid Reverse
Press
Each time the button is pressed, the speed of
rapid forward /reverse changes according to
the disc as follows.
18
Disc Slot
Eject Button
(EJ) button on the front panel or on
(Stop) button to
(Play)
(Stop) button twice to stop the
on the remote control for the
on the front panel
on the remote control or
on
on the
&
during playback.
on
Advertisement
Table of Contents
