Table of Contents
Advertisement
Chapter 2.
The switch provides three different running speeds – 10Mbps, 100Mbps and 1000Mbps, and automatically
distinguishes the speed of the incoming connection.
TT-DT10-2G-8GP+, familiarize yourself with its display indicators and ports. Front panel illustrations in this
chapter display the unit LED indicators. Before connecting any network device to the TT-DT10-2G-8GP+,
please read this chapter carefully.
2.1 Front Panel
The Front Panel of the TT-DT10-2G-8GP+ PoE+ Ethernet Switch consists of 10 Auto-Sensing
10/100/1000Mbps Ethernet RJ45 Ports. The LED Indicators are also located on the front panel.
The front panel provides one DIP switch for Standard, VLAN and Extend mode selections. The detailed
descriptions are shown in the following table.
DIP Switch Mode
Hardware Description
TT-DT10-2G-8GP+ Switch Front Panel
Model number may or may not be permanently screen printed on
front of unit.
Function
Standard mode makes the TT-DT10-2G-8GP+ operate as a general switch and all
PoE ports operate at 10/100/1000Mbps auto-negotiation.
VLAN mode makes the TT-DT10-2G-8GP+ operate as a VLAN isolation switch
where
1. Port 1 to port 8 will isolate respectively.
2. Port 1 to port 8 will only communicate with port 9 and port 10 (uplink ports).
For easier management and control of the
Advertisement
Table of Contents
