You must use the screws supplied with the mounting brackets. Damage caused to the
parts by using incorrect screws will invalidate the warranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the opposite side.
Step 5: After the brackets are attached, use suitable screws to securely attach the brackets to the rack, as
shown below
Step 6: Proceed with Steps 4 and 5 of session 3.1 Desktop Installation to connect the network cabling and
supply power to your Switch.
Attaching the Brackets to the TT-DT10-2G-8GP+
Mounting the TT-DT10-2G-8GP+ in a Rack