Ti-84 Plus Link - Texas Instruments TI-84 Plus Manual Book

TI-84 Plus LINK

This chapter describes how to communicate with compatible TI units. The
TI-84 Plus has a USB port to connect and communicate with another TI-84
Plus or TI-84 Plus Silver Edition. A USB unit-to-unit cable is included with
the TI-84 Plus.
The TI-84 Plus also has an I/O port using a I/O unit-to-unit cable to
communicate with:
• TI-83 Plus Silver Edition
• TI-83 Plus
• TI-83
Connecting Two Graphing Calculators with a USB Unit-to-
Unit Cable or an I/O Unit-to-Unit Cable
USB Unit-to-Unit Cable
The TI-84 Plus USB link port is located at the top
right edge of the graphing calculator.
1. Firmly insert either end of the USB
unit-to-unit cable into the USB port.
2. Insert the other end of the cable into the
other graphing calculator's USB port.
I/O Unit-to-Unit Cable
The TI-84 Plus I/O link port is located at the top
left edge of the graphing calculator.
1. Firmly insert either end of the I/O
unit-to-unit cable into the port.
2. Insert the other end of the cable into the
other graphing calculator's I/O port.
Communication Link
• TI-82
• TI-73
• CBL 2™ or a CBR™
121