La Boite Concept LP160 User Manual page 45

4.6. SWITCH ON/OFF THE LP/AP 160
1 Plug the power cord into the socket (13) located
under your LP/AP 160
2 Plug the power cord into the wall power socket and then
make sure the Master ON/OFF switch (15) located near the power
cord is turned ON.
3 Turn on the LP/AP 160 amplifier by pressing the ON / OFF button (7)
on the control panel. The white LED corresponding to the power
button will be turned off.
4 If you connect the LP/AP 160 for the first time, the MUTE LED (8) is
ON. Repeatedly press the VOL + button (9) until the researched
listening level.
5 To turn OFF the LP/AP 160, press the ON/OFF button (7)
located on the control panel. The corresponding LED indicator lights
up.
6 If you do not use your LP/AP 160 for an extended period, turn off
the master ON/OFF switch (15) located under the bottom
panel of the enclosure.
45