La Boite Concept LP160 User Manual page 34

Table of Contents

Advertisement

Available languages

Available languages

in sunlight or nearby a heat source. No fire source such as candles shall be
placed on the device. Also, avoid any source which could cause vibration,
dust, coolness or moisture. The device can be used at average temperatures.
The unit must be installed on the two (2) LP/AP provided legs.
Do not operate the central part without its sides bases. Do not install the
equipment in a completely closed room or in a set of compartments. Do not
place the unit on an unstable surface or on a shelf. Make sure that the furniture
inserts have been correctly fastened. If not, the unit could fall and injury a child
or an adult, and damage the product as well. Due to the disturbed magnetic
fields, no record player or CRT television set must be placed nearby the device
to avoid possible interference.
POWER SOURCE
The unit should only be used with the type of electric power source compatible
indicated in the trapdoor storage space. If you are not sure about the power
source rating in your place, please contact your dealer or the company
responsible for the electric power installation in your area. The unit was
designed to be left in Stand-by mode when not in use ; this will allow increasing
the amplifier's life (this is true for all electrical devices). To switch off the unit,
press the « Stop/Arrêt » (ON/OFF) button on the rear of the device (metal plate
located under the central unit). If you do not intend to use the unit for a long
period, simply unplug it from the wall power socket.
OVERLOAD
Avoid overloading the wall-mounted electrical installations or the extension
cords because this could cause a fire or an electrical discharge. Overloaded DC
installations, extension cords, damaged power cables, a damaged or cracked
insulation and broken plugs are dangerous. They could cause a discharge or
a fire. Make sure that each cables are correctly inserted. To avoid humming
or background noise, do not mix interconnections with the power cord or
loudspeakers cables.
CLEANING
In order to clean the unit, wipe it with a dry, lint-free cloth. Do not use liquid
cleaning products containing alcohol, ammonia or abrasives. Do not use a
34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ap160

Table of Contents