La Boite Concept LP160 User Manual page 42

4.2.
From top to bottom (numbers corresponding to
the control):
1 Auxiliary Input
2 Analog Input dedicated to your
Wireless Kit
3 Phono input dedicated to your
pre-amplified turntable
4 Coaxial input
5 Optical input
6 Optical input for connecting your
Wireless Kit
4.3.
On the LP/AP 160, you can select the source input on the control panel (part
4.4) by pressing the the pushbuttons on (1 to 6). Make sure to correctly plug
the cables before selecting the source to play.
1 Select AUX which corresponds to the first top RCA plug for analog
sound.
2 Select ANALOG Wireless that is corresponding to the second under
RCA plug for analog sound purpose from your wireless kit device.
3 Select PHONO line which corresponds to the last remaining RCA
plug, plus grounding pin for none pre-amplified turntable system. Use
above AUX (1) or ANALOG Wireless (2) RCA plugs if your turntable
system is already pre amplified.
4 Select COAX digital input which corresponds to a single RCA plug for
S/PDIF digital sound (2.0 stereo coding).
5 Select the OPTICAL digital input which corresponds to the Toslink
plug for digital sound.
6 Select OPTICAL Wireless input which corresponds to the last Toslink
plug for digital sound from your wireless kit device.
42
INPUT SOURCES PANNEL
CHOOSING AND PLUGING INPUTS
7 1
2
10
8
3
6
4
5
5
9
6