Page 1
2. Now connect the end of the RJ45 to RJ45 connection cable (EHS adapter) marked in red with the socket of the EHS adapter marked with "AUX" and the socket of your Jabra GN9350e base marked with "AUX". 3. Now connect the RJ9 to 3.5 mm jack connection cable marked white "D"...
Page 2
28/06/2021 23:48 Software setup: In the LCD Display, set the Jabra GN9350 to "DHSG" and press the OK button to confirm the software setting. Base setup: Set the phone set-up switch to "A". Headset answer/end: As soon as the dial tone signal can be heard in the headset, you can answer the call by pressing the "answer/end"...
Page 3
Important: The dial tone signal in the headset is only transmitted if one of the following ringtones is used, e.g., Standard / Classic / Cold River / Dooing-Dooing. > Menu> Settings> Dial Tone > Internal / External https://www.jabra.in/supportpages/jabra-gn9350e/9356-607-403/faq/53031b6e-3f3a- Page 3 of 4 4bbe-b9ce-2d0dc8a123ba...
Page 4
Should the dial tone signal transfer not work although you have set up the correct ringtone, please check the following settings: Menu > Settings > Phone > Internal/External, More Options No sound, Progressive, Beeps> all points must be set to "OFF". https://www.jabra.in/supportpages/jabra-gn9350e/9356-607-403/faq/53031b6e-3f3a- Page 4 of 4 4bbe-b9ce-2d0dc8a123ba...