BE HK070-R User's Manual & Operating Instructions
  1. Manuals
  2. Brands
  3. BE Manuals
  4. Heater
  5. HK070-R
  6. User's manual & operating instructions

BE HK070-R User's Manual & Operating Instructions

Oil fired forced convection air heater
Hide thumbs
Table of Contents

Advertisement

Quick Links

CONSUMER: READ AND SAVE THESE INSTRUCTIONS
GENERAL HAZARD WARNING:
DANGER
READ AND UNDERSTAND ALL OF THE INSTRUCTIONS IN THIS MANUAL
BEFORE ASSEMBLING, STARTING, OR SERVICING THE HEATER. Be sure to comply with the
instructions and warnings provided with this heater. Failure to comply can result in fire or explosion
that can cause property loss, bodily injury, or loss of life. Only persons who can follow and
understand these instructions should operate or service this heater.
NOT FOR USE IN RESIDENTIAL LIVING AREAS OR IN ENCLOSED SPACES
DANGER
WITHOUT ADEQUATE VENTILATION. TO BE USED IN WELL VENTILATED
COMMERCIAL / INDUSTRIAL OCCUPANCIES. This is an unvented portable heater that uses
air (Oxygen) from within the area in which it is used. Failure to provide adequate combustion and
ventilation air will result in asphyxiation, carbon monoxide poisoning, bodily injury or death. Refer to
"Ventilation" on Page 7.
This appliance shall be installed in accordance with the rules in force,
WARNING
and used only in sufficiently ventilated space. Consult instructions before
installation and use of this appliance.
HK070-R / HK125-RW
OIL FIRED FORCED CONVECTION AIR HEATER
HK070-R
ORIGINAL INSTRUCTIONS
© 2019, BE Pressure Australia
15 Hudson Place
Mulgrave NSW 2756, Sydney
User's Manual &
Operating Instructions
HK125-RW
Head Office
BPRG-400

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HK070-R and is the answer not in the manual?

Questions and answers

Related Manuals for BE HK070-R

Summary of Contents for BE HK070-R

  • Page 1 DANGER READ AND UNDERSTAND ALL OF THE INSTRUCTIONS IN THIS MANUAL BEFORE ASSEMBLING, STARTING, OR SERVICING THE HEATER. Be sure to comply with the instructions and warnings provided with this heater. Failure to comply can result in fire or explosion that can cause property loss, bodily injury, or loss of life.

  • Page 2: Table Of Contents

    THE INSTALLATION OF THIS HEATER SHALL COMPLY WITH THE REGULATIONS OF THE AUTHORITIES HAVING JURISDICTION. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience or and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

  • Page 3: Safety Information

    This appliance is rated at 98% combustion If the supply cord is damaged, it must be efficiency, but does produce small amounts of replaced by a special cord or assemble available from the manufacturer, its service agent or carbon monoxide.
  • Page 4 Figure 1 Fuel Cap HK125-RW Radiant Cone Handle Front Safety Guard Radiant Visor Fuel Cap Adjustment Knob Can Tilt Up To 15° Wheel Frame Wheel Figure 2 Drain Bolt Oil Fired Radiant Heater User’s Manual © 2019, BE Pressure Australia...

  • Page 5: Hk070-R Assembly

    Figure 3. Attach the handle while still in the box 2. Insert screws and tighten firmly. for easier unpacking. (See Figure 4) Figure 3 Figure 4 Oil Fired Radiant Heater User’s Manual © 2019, BE Pressure Australia...
  • Page 6 - Phillips Head Screw Driver - 8 mm open end wrench Tip: Be sure to remove the axle from the Tip: Use a power screwdriver and side of the Styrofoam packaging. locking wrench for easier assembly.

  • Page 7: Hk125-Rw Assembly

    5. Attach top safety guard using the two outer-most extra screws on the top of the screws provided. radiant cone (See photo). Note: Save the box and packaging materials for future storage. Oil Fired Radiant Heater User’s Manual © 2019, BE Pressure Australia...

  • Page 8: Ventilation

    This appliance is designed to WARNING - NEVER store Paraffin in the living space. Paraffin operate safely at a minimum should be stored in a well ventilated area outside ambient temperature of -20° C. the living area. Use caution when servicing in...
  • Page 9 (grounded) extension cord that is When the Cooling Cycle is complete the fan at least 1.8 meters long and is a minimum of will stop running and it will be safe to unplug 14 AWG rating. the heater.

  • Page 10: Maintenance

    (See Figure 11.2) Figure 11.1 Store Heater in a dry, well ventilated area. Figure 11.2 Be sure that the storage area is free of dust FAN BLADES: and corrosive vapors. Repack the heater The fan blades should be cleaned at least once in the original packaging and keep user’s...
  • Page 11 Maintenance - HK070-R Service (Continued): FILTERS: NOZZLES: The fuel filter and oil filter should be cleaned at Nozzles should be cleaned or replaced at least least twice per heating season by rinsing it in once per heating season. Contaminated fuel clean paraffin or diesel.
  • Page 12 SPARK PLUG damage heater. Store Heater in a dry, well ventilated area. Be sure that the storage area is free of dust and corrosive vapors. Repack the heater in the original packaging and keep user’s manual in an easily accessible place.
  • Page 13 Maintenance - HK125-RW Service (Continued): FILTERS: PHOTOCELL: The fuel filter and oil filter should be cleaned at The photocell should be cleaned at least once least twice per heating season by rinsing it in per heating season or more depending on clean paraffin or diesel.

  • Page 14: Troubleshooting Guide

    6. Check wiring connections (See tion between Circuit Board and Wiring Diagrams, Page 14). Photocell. 7. Check to be sure cooling fan is not 7. Cooling Fan is obstructed obstructed. 1. No paraffin/ diesel in fuel tank. 1. Fill tank with fresh paraffin/ diesel.
  • Page 15 NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR WHILE CONNECTED TO A POWER SOURCE Wiring Diagrams HK070-R Figure 23 HK125-RW AC230V/50Hz AC240V/50Hz 250V/3.15A Figure 24 Oil Fired Radiant Heater User’s Manual © 2019, BE Pressure Australia...

  • Page 16: Exploded View

    Power Switch wire Assembly 75-012-0220 01.04.75.007010087 Electronic Pump 75-027-0261 01.01.75.207020001 01.04.70.104520033 Igniter 75-075-0200 Main PCB with Thermostat 75-025-0455 01.04.75.207020002 Tip Over Sensor 75-051-0200 01.04.75.007010149 Tip over Sensor Wire Assembly 75-051-0260 01.04.75.007010086 Oil Fired Radiant Heater User’s Manual © 2019, BE Pressure Australia...

  • Page 17: Parts List

    New in 2017 75-011-0690 75-027-0630 Pump Connector (not shown) New in 2017 Inlet Tube Assembly (not shown) New in 2017 75-024-0725 Hose Clamp (not shown) New in 2017 75-001-0505 Oil Fired Radiant Heater User’s Manual © 2019, BE Pressure Australia...
  • Page 18 CONNECTED TO A POWER SOURCE Exploded View - HK125-RW ALWAYS contact the manufacturer of this heater before replacing any parts WARNING other than those specified or recommended in the servicing instructions. Oil Fired Radiant Heater User’s Manual © 2019, BE Pressure Australia...
  • Page 19 72-012-0200 01.01.72.012510242 01.01.72.012510238 Front Frame 72-042-0220 72-035-0700 01.01.72.012510234 Burner Bracket Radiant Visor 72-012-0220 01.01.72.012510225 72-035-0630 01.03.72.012510046 Burner Housing Gasket 72-035-0630 01.03.72.012510045 Burner Bracket Gasket 72-035-0215 01.03.72.012510047 Burner Head Gasket Oil Fired Radiant Heater User’s Manual © 2019, BE Pressure Australia...
  • Page 20 CONNECTED TO A POWER SOURCE Locating Your Serial Number: Your serial number can be found on a blue label on the left side cover. For Example: S150100001, where the year of manufacture is represented by the 2 digits immediately following the first letter.

This manual is also suitable for:

Hk125-rw

Table of Contents