Installation Of The Remote Installed Control Unit (Option) - Procopi ClimExel HC-HH-62M Installation Instructions And Recommendations For Use And Maintenance

VI Installation of the remote installed control unit (option)
CLIMEXEL HC-HH heat pumps feature a control panel on the same side as the electrical and hydraulic connections. A
remote installed control unit can also be installed. This system comprises :
- a control panel with support fitting/housing
- a cable, the length of which should be specified on placing the order
The remote installed control unit mirrors the display of the control panel on the machine. It also allows the user to enter
commands as on the integrated control panel.
To connect the remote installed unit:
- from the exterior, thr gland and pull the
wire into the machine to create slack - photo
- Remove the front panel that houses the
regulator to access the inputs behind it.
- The remote installed control unit is connected as
illustrated in the photo. Caution, to ensure that polarities
are respected, the connector is fool proofed and will only
enter in one direction: do not force it.
Next, attach the remote installed control unit housing to the wall using 2 screws and finally attach the control unit to its
housing using another 2 screws (the screws are provided).
2009/01 - Indice de révision : C - Code : 0033385
38/48