Volkswagen Passat 1995 Official Factory Repair Manual page 148

Transmission, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.3
- Clamp-off ATF cooler hoses with 3094 or
equivalent and disconnect hoses at ATF cooler.
- Disconnect harness connector for Coolant Fan.
- Remove upper engine/transmission mounting
bolts.
- Remove Starter.
- Install support bar 10-222 A with legs 10-222 A/1
(6-cyl. engine adapter 10-222 A/3) and support
engine/transmission in this position.
Page 2 of 9
37-35
12/6/2004