Important Information - jcb 540-170 Service Manual

The Operator Manual
!M
WARNING
You and others can be killed or seriously injured if you
operate or maintain the machine without first
studying the Operator Manual. You must understand
and follow the instructions in the Operator Manual. If
you do not understand anything, ask your employer
or JCB dealer to explain it.
INT-1-4-2
Do not operate the machine without an Operator Manual,
or if there is anything on the machine you do not
understand.
Treat the Operator Manual as part of the machine. Keep it
clean and in good condition. Replace the Operator Manual
immediately if it is lost, damaged or becomes unreadable.
2-1-2

Important Information

T1-042
Safety Warnings
In this publication and on the machine, there are safety
notices. Each notice starts with a signal word. The signal
word meanings are given below.
Denotes
precautions are not taken, it is highly probable that the
operator (or others) could be killed or seriously
injured.
INT-1-2-1
Denotes a hazard exists. If proper precautions are not
taken, the operator (or others) could be killed or
seriously injured.
INT-1-2-2
Denotes a reminder of safety practices. Failure to
follow these safety practices could result in injury to
the operator (or others) and possible damage to the
machine.
INT-1-2-3
9803/3750-05 (2-01-01)
Section 2-1 - Care and Safety
Important Information
This safety alert
important safety
manual. When you see this symbol, be
alert, your safety is involved, carefuly
read the message that follows, and inform
other operators.
!M
DANGER
an extreme hazard
!M
WARNING
!M
CAUTION
Safety Notices
system identifies
messages in this
exists. If proper
2-1-2