Removing And Replacing Components - jcb 540-170 Service Manual

Section 2-2 - Care and Safety
General Procedures

Removing and Replacing Components

Removing and Replacing Components
Renewal of oil seals, gaskets, etc., and any component
showing obvious signs of wear or damage is expected as
a matter of course. It is expected that components will be
cleaned and lubricated where appropriate, and that any
opened hose or pipe connections will be blanked to
prevent excessive loss of hydraulic fluid and ingress of dirt.
2-2-14 2-2-14
9803/3750-05 (2-02-01)