VOLTCRAFT DL-240K Operating Instructions Manual page 36

Symbols in the LC display
Symbol Meaning
Alarm indicator: Measured values are within the limits defined during configuration.
No high/low alarm is set.
Alarm indicator: Measured values are exceeding the limits defined during configuration.
Recording has been stopped.
Recording in progress.
Recording has been paused.
Device is ready to record: Device is configured, and recording not started yet. It will disappear
P
once the data logger records.
Battery symbol: Full battery capacity
Battery symbol: Sufficient battery capacity
Battery symbol: Low battery capacity, replace the battery
ºC Unit for temperature value
ID Logger ID
MAX/MIN Maximum/minimum measurement
USB Connected to computer.
USB PDF Connected to computer and generating PDF report.
PAUSE Indicates that the limit alarm pause function is enabled.
MODE
Indicates that a start mode has been chosen. It will be shown before recording starts.
START
MODE
Indicates that a stop mode has been chosen. It will be shown before recording ends.
STOP
TIME
Indicates remaining time before start of recording.
START
TIME STOP Indicates remaining time until end of recording.
Ready to start recording by holding button ENTER (7) for few seconds.
(Select "START UPON KEYPRESS" as "RECORD START CONDITION" during configuration.)
Recording can be stopped by holding button ENTER (7) for few seconds.
(Select "STOP BUTTON" as "STOP STYLE" during configuration.)
/
Ready to activate limit pause function by holding button ENTER (7) for few seconds.
/
Ready to deactivate limit pause function by holding button ENTER (7) for few seconds.
36