Nokia 7600 Disassembly Instructions Manual page 12

Hide thumbs Also See for 7600:

NMM-3

5 - Disassembly Instructions

Note: Ensure the B-Cover is supported underneath when the window is assembled. Assembly

force must be at least 60N/cm² for at least 6 seconds.

Page 5-12

Company Confidential

CCS Technical Documentation

4. Turn the B-Cover over once the

boot is aligned and push the boot

retention clips into the recesses in

the B-Cover so they are visible from

the outside of the B-Cover.

5. Assemble the camera window

adhesive to the camera window

annulus on the B-Cover, ensuring it is

centrally fitted and the yellow back-

ing tape is removed.

6. Align the camera window to the

B-Cover using the alignment feature

in both the window and the B-Cover.

Press down on the edges of the win-

dow (taking care not to damage it)

until all three clips snap home to the

B-Cover.

7. Take an IR window and snap it into

the B-Cover ensuring that it is orien-

tated the correct way around. Assem-

ble the right hand side clip first into

the B-Cover then snap the second

clip into place.

Note: Ensure the front and back of

the window is not cosmetically dam-

aged by wearing soft gloves when

pressure is applied to the window.

Issue 1 (11/2003)

Table of Contents