Advertisement
AT3527
Polar Pattern
0
330
300
270
240
210
180
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
Dimensions
0.74"
18.9 mm
XLRM-Type Plug Wiring
Low Impedance Balanced
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
Form No. 0343 -9802-00-B/W © 1998 Audio -Technica U.S., Inc. Printed in U.S.A.
A T 3527 SPECIFICATIONS
ELEMENT
30
POLAR PATTERN
FREQUENCY RESPONSE
60
OPEN CIRCUIT SENSITIVITY
IMPEDANCE
MAXIMUM INPUT SOUND LEVEL
90
DYNAMIC RANGE (TYPICAL)
SIGNAL-TO-NOISE RATIO
120
HI-PASS FILTER (LOW-END ROLL-OFF)
POWER REQUIREMENTS
150
SWITCHES
WEIGHT (LESS ACCESSORIES)
DIMENSIONS
OUTPUT CONNECTOR
ACCESSORIES FURNISHED
4.81"
122.3 mm
†
1
0.83"
21.0 mm
Fixed-charge back plate
permanently polarized condenser
Omnidirectional
30 -20,000 Hz
–51 dB (2.8 mV) re 1V at 1 Pa*
100 ohms
148 dB SPL, 1 kHz at 1% T.H.D.
158 dB SPL, with 10 dB pad (nominal)
124 dB, 1 kHz at Max SPL
70 dB, 1 kHz at 1 Pa*
80 Hz, 12 dB/octave
48V phantom (±4V), 4 mA typical
Flat response, hi-pass; 10 dB pad (nominal)
3.7 oz (105 grams)
4.81" (122.3 mm) long,
0.83" (21.0 mm) maximum body diameter
Integral 3- pin XLRM-type
AT8405 snap-in clamp for
5
/
"-27 threaded stands;
8
foam windscreen; soft protective pouch
†
In the interest of standards development, A.T.U.S.
offers full details on its test methods to other industry
professionals on request.
* 1 Pascal = 10 dynes /cm
2
= 10 microbars = 94 dB SPL
1
Typical, A-weighted, using Audio Precision System One.
Optional Accessories:
• AT8314 2-conductor, shielded, vinyl-jacketed,
broadcast-type cable with XLRF-type connector
at microphone end, XLRM-type connector at
equipment end. Available in 10', 20', 25', 30',
50' and 100' lengths.
• AT8407 universal "clothes-pin" stand clamp
fits both tapered and cylindrical microphones.
• AT8410a shock mount for boom or stand
operation. Universal "clothes-pin" stand clamp
fits both tapered and cylindrical microphones.
• AT8415 low-profile shock mount for boom or
stand operation.
• CP8506 four- channel 48V phantom
power supply (AC powered).
• AT8801 single-channel 48V phantom power
supply (AC powered).
One-Year Limited Warranty
Audio -Technica microphones and accessories purchased
in the U.S.A. are warranted for one year from date of
purchase by Audio-Technica U.S., Inc. (A.T.U.S.) to be
free of defects in materials and workmanship. In event of
such defect, product will be repaired promptly without
charge or, at our option, replaced with a new product of
equal or superior value if delivered to A.T.U.S. or an
Authorized Service Center, prepaid, together with the
sales slip or other proof of purchase date.
from A.T.U.S. is required for return. This warranty
excludes defects due to normal wear, abuse, shipping
damage, or failure to use product in accordance with
instructions. This warranty is void in the event of unau-
thorized repair or modification.
For return approval and shipping information, con-
tact the Service Department, Audio -Technica U.S., Inc.,
1221 Commerce Drive, Stow, Ohio 44224.
Except to the extent precluded by applicable state law,
A.T.U.S. will have no liability for any consequential,
incidental, or special damages; any warranty of mer-
chantability or fitness for particular purpose expires
when this warranty expires.
This warranty gives you specific legal rights, and you
may have other rights which vary from state to state.
Outside the U.S.A., please contact your local dealer for
warranty details.
Prior approval
Advertisement
