Operating Instructions; Adjust The Staple Leg Length; Adjust The Penetration Depth - Josef Kihlberg c.561PN Operating Instructions Manual

KUDA PACKAGING
6
18mm
Fig. 4
Fig. 5
SERVIS A NAHRADNÍ DÍLY
06.14
www.kuda-packaging.com

OPERATING INSTRUCTIONS

B
15mm
1
+420 607 237 237
info@kuda-packaging.com
6.1 ADJUST THE STAPLE LEG LENGHT
Be sure that the tool is not pointing at
yourself or anyone else when connec-
ting it to the compressed air line.
The stapler is adjustable for 15 or 18 mm staples.
The stapler setting for a different staple leg lenght is
altered as follows. Start by adjusting the depth of sta-
pling for deep clinching (=) as shown in Fig. 5.
– With a 2,5 mm allen key, unscrew locking screw
(A) two turns.
– With a screw driver, adjust screw (B) to 15 or 18
mm leg length (Fig. 4)
– Tighten the locking screw.

6.2 ADJUST THE PENETRATION DEPTH

The depth of the stapling is easily adjused using the
setting knob.
– Depress the knob (Fig. 5/1) and turn it to any of the
five positions.
– Low stapling penetration
= Deep stapling penetration
servis@josef-kihlberg.eu
Josef Kihlberg c.561PN
7