Emptying The Dirty Water Tank - Bissell POWERCLEAN TURBOBRUSH PET 2806 Series Instructions Manual

Cleaning Your Carpet
(continued)
4.
Make cleaning passes. Repeat these passes until solution being pulled up appears clean. Empty
the Dirty Water Tank and refill the Clean Water Tank as needed.
1. Hold Spray Trigger 2. Release Spray Trigger
• 1 pass forward • 1 pass forward
• 1 pass back • 1 pass back

Emptying the Dirty Water Tank

For maintenance how-to videos, visit BISSELL.ca/support.
1. 2.
Turn OFF and unplug your Release Dirty Water Tank
machine. by pulling out and up on the
latches on the side.
4. 5.
Lift tab on the top of the To empty, pour out dirty
tank. water using opening at
back of tank. Rinse the tank
thoroughly.
IMPORTANT
» Please check manufacturer's tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep
cleaning delicate, silk, wool, antique, or area rugs without a manufacturer's tag.
» Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature
belt failure.
3.
Carefully remove tank by
lifting up on the Dirty Water
Tank Handle.
6.
To continue cleaning, align
the bottom of the tank to the
base and secure into place
with latches.
BISSELL.ca 5