Handsfree Microphone Hfm-14 And Handsfree Speaker Hfs-10; External Mobile Antenna (Not Supplied); External Sim Card Reader; Installation - Nokia NME-2A Series Installation Instructions Manual

NME–2A
Installation Instructions
Handsfree Microphone HFM–14 and Handsfree Speaker HFS–10
The safest and easiest way to have call while driving is use the handsfree
option. The system consist of two components, the microphone HFM–14
and loudspeaker HFS–10.
The handsfree microphone can usually be installed on the drivers sunvisor
or A–pillar. The main idea is to get the microphone as close to the drivers
mouth as possible, and to attach the microphone to a surface that is
mechanically quiet. The microphone connects to the system cable MIC
molex connector.
The loudspeaker should be mounted at least 3 ft/1 m away from the
handsfree microphone to avoid acoustic feedback. The loudspeaker
connects to the system cable SPEAKER molex connector.

External Mobile Antenna (not supplied)

The phone is designed to operate with a high quality external antenna.
However, due to many different types of antennas being available, an
antenna is NOT included as part of car kits. Please, consult the dealer to
find out which is the most suitable antenna type for your installation.

External SIM Card Reader

The CAE–2 is installed using a extension cable which is plugged into one
of the modular connectors on the card reader and into the connector on
the system cable normally used for the handset. The handset is then
connected to the second modular connector on the card reader. After
power up the system is ready for insertion of a SIM card. The SIM card is
inserted with the arrow on the SIM card facing the light guide for the LED
on the CAE–2. If the card is inserted upside down it will be rejected by the
card reader, and the message CARD REJECTED is written in the display
of the handset. If this happens, draw out the SIM card and insert it in the
right way.

Installation

There are some important aspects that require special attention in
positioning mobile phone accessories.
The positioning of the handset holder is the most important factor when
trying to achieve the most comfortable position for the user. The location
of the holder should be selected so that the visibility of the handset's
display is good under all lighting conditions, but not so that the driver's
attention is easily distracted. The holder should be located so that the
driver can easily reach the keypad. Under no circumstances should the
holder prevent the driver from controlling or operating the vehicle in any
way or observing traffic.
Page 8
P.A.M.S.
Technical Documentation
Original 08/97