Drying Procedures - Kyocera DURAFORCE ULTRA 5G User Manual

With sapphire shield
Hide thumbs Also See for DURAFORCE ULTRA 5G:
Table of Contents

Advertisement

Drying Procedures

Please see the proper procedures below.
NOTE: For the Procedures to be followed in cleaning and disinfecting the phone, please visit
https://kyoceramobile.com/support/phone/cleaning_guide/.
Drying Your Phone
CAUTION! If your phone has been submerged in water, for example to use the camera in
Underwater Mode, rinse all surfaces of the phone thoroughly with clean, fresh water
before drying.
1.
Wipe down all outside surfaces of your phone with a clean lint-free cloth.
2.
Pat with a clean dry cloth to remove moisture from speakers, microphones and
earpiece. Repeat patting each area about 20 times.
3.
After removing all the water, let the phone dry completely at room temperature.
CAUTION! Excessive heat may damage your phone; never use a hair dryer, an oven or any
other appliance to dry out your phone.
NOTE: If your phone still retains some moisture, audio quality and speaker performance may be
affected. Dry your phone completely before using it again.
Drying Procedures
105

Advertisement

Table of Contents
loading

Table of Contents