Advertisement
Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com
Visit the Viking website for the latest edition of this technical data page www.vikinggroupinc.com
4. INSTALLATION
DANGER
Improper installation can impede the sprinkler operation during fire conditions. Fire can lead to serious injury or death.
► Follow the procedures in this document to properly install the sprinkler guard.
A. Installing the XG Sprinkler Guard on the Sprinkler
Tools needed:
•
T15 Torx screwdriver (not available from Viking.)
Procedure:
1. Install the sprinkler into the piping according to the sprinkler's Technical Data sheet.
2. Loosen the Torx screw and open the guard.
Figure 2a: Opening the Guard
3. With the sprinkler frame arms parallel to the vertical guard members, maneuver the guard onto the sprinkler.
NOTE:
For Upright sprinklers, the guard must be oriented and angled as shown (Figure 3a) in order to get the
deflector inside the frame.
Figure 3a: Maneuvering the Guard onto the Sprinkler
Form No. F_021319
20.10.06
TECHNICAL DATA
The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058
FIRE HAZARD - RISK OF SERIOUS INJURY OR DEATH
Rev 20.2
GUARDS AND WATER
XT1 SPRINKLERS
Figure 2b: Opening the Guard
Figure 3b: Maneuvering the Guard onto the Sprinkler
Page 3 of 8
SHIELDS FOR
Advertisement
