Machine Function; Auto / Manual Switch - Numatic TEM 390A-11 Owner's Instructions Manual

1 2
Daily
Keep the machine clean, including hoses and tubes.
Ensure the bag and filter are fitted.
Regularly examine the power cord.
Check dust bag frequently.
Check filters are clean.
Weekly - as daily and:-
Check for any worn or damaged parts and replace immediately.
On / Off
1
If your appliance fails to operate, ensure that the Auto/Manual
switch (2) is in the off position prior to switching the On/Off
switch (1) to the On position.

Auto / Manual Switch

2
Auto Mode - If an external appliance fails to operate when
connected to the vacuum auxiliary socket (3) please check
and ensure that switch (1) & (2) are in the On position prior to
operating the external appliance.
TEM 390-A 2200W Maximum Load (min. 100W).
3
If the auxiliary socket is overloaded, the machine will cut out.
To reset switch off the machine, then wait for
5 seconds before switching on.
110 Volt industrial models
TEM 390-A 1100W Maximum Load (min. 100W).

Machine Function