Page 1
This machine is suitable for DRY use only. Make sure that the filtration system fitted to the machine is suitable for the material being collected. L-Class Owner Instructions CAUTUION, Read the Instructions before using the machine. TEL 390-11 620W (Kit AS10)
Replacing HEPA filters process: Remove the contaminated HEPA filter and place in a suitably impervious plastic bag and dispose of in accordance with current regulations. Replace the HEPA ilter with an identical Numatic approved part (901647) 901647 H13 FILTER ASSEMBLY (HZ)
Page 6
Changing / Replacing Cable Moving your machine...
About the Machine Rating Label Company Name & Address Machine Description Voltage Frequency Power rating Machine yr/wk Serial number Weight (ready to use) WEEE Logo CE Mark Safety Critical Component: Mains Lead H05VV-F 10m x 2 x 1.0mm² (110V) H05VV-F 10m x 2 x 1.0mm² WEEE (Waste, Electrical and Electronic Equipment) Vacuum Cleaner Accessories and packaging should be sorted for environmentally-friendly recycling.
Page 8
Regularly examine the power cord. If damage is found such as cracking or ageing the power cord must be replaced by a qualified person. • Only replace the power cord with the correct Numatic approved replacement part. DO NOT •...
Daily Keep the machine clean, including hoses and tubes. Ensure the bag and filter are fitted. Regularly examine the power cord. Check dust bag frequently. Check filters are clean. Weekly - as daily and:- Check for any worn or damaged parts and replace immediately. Replacement Parts Filter 604165...
Need help?
Do you have a question about the TEL 390-11 and is the answer not in the manual?
Questions and answers