Download Print this page

Sealey MAC03 Quick Start Manual page 2

Tyre inflator/mini air compressor twin cylinder 12v

Advertisement

4.4.
Unscrew the air hose from the tyre valve. Replace the dust cap onto the valve.
4.5.
After use, disconnect the compressor from the vehicle accessory socket or battery and store it in a safe, dry location.
4.6.
The work light is switched on/off by pressing the small unmarked button above the lens
4.7.
General information
4.7.1.
The time it will take to inflate a tyre will depend upon the amount of air required.
4.7.2.
Should the compressor fail to start when switched on, check the connections.
note: The compressor may also be used to inflate items such as inflatable dinghies, sports balls, air beds etc. Use the appropriate
inflation nozzle for the item.
caution: Some items may not indicate pressure required or the maximum pressure. Be careful not to over-inflate.
note: The pressure gauge is not a calibrated instrument. It is recommended to use an approved dial pressure gauge for a definitive
reading.
5. maintenance
5.1.
Keep the unit clean by wiping with a dry cloth.
5.2.
Store the unit in a dry, child proof area.
5.3.
Any other maintenance should be carried out by a competent person.
Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
enVironment protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. when the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
weee reGulations
dispose of this product at the end of its working life in compliance with the eU directive on waste electrical and electronic equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
sealey Group, Kempson way, suffolk Business park, Bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack Sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
mAC03 Issue 2 (H) 08/03/19

Advertisement

loading