Table of Contents
Advertisement
After unpacking, main components confirm contents:
1. Cooking Oil Tester
2.Micro USB cable.
3. Instruction manual.
4. Probe cover.
4.2 Installation conditions
1. This instrument should not be installed in places where it is exposed to direct sunlight
and cold, excessive heat or humidity. Generally, the indoor temperature should be kept
between 10°C and 28°C (50° to 82°F).
2. The charging power supply requires a voltage of 5V and a current of at least 1A. You
can use the 5V mobile phone charger directly.
3. This instrument should be used away from large electrical equipment. There is no
vibration, no corrosive liquid, no strong electromagnetic field interference at the work
site.
4.3 Installation steps
1. It is recommended to fully charge the instrument before using it for the first time.
2. Remove the probe cover before use and wipe the sensor clean with test paper.
5. Use and operation
5.1 Introduction of function
Power on: Press [power] key(<1 second), the instrument turns on, the display lights
up, the boot initialization interface appears, and then automatically counts into the
measurement interface, at which point the measurement operation can be started.
Shutdown: Press [Power] key (<1 second) when the power is on, the instrument is turned
off.
5.2 Security measures
This instrument should be used away from large electrical equipment, and there is
no vibration, no corrosive liquid, no strong electromagnetic field interference at the
workplace.
5
Advertisement
Table of Contents
