Advertisement
Available languages
Available languages
PROGRAM TO COMPATIBLE GARAGE
DOOR OPENERS
1. Start with the garage door closed.
2. Remove the remote control cover. Press and
hold the program button until the LED turns
on.
3. Press and release the SMART/ LEARN button
on your garage door opener.
4. Select a button to program on the remote
control. Press and release the button the
specified number of times according to the
following chart. NOTE: Make sure the LED
stops flashing between each press of the
button. The garage door opener will respond
by clicking, blinking or activating.
LED
Program
Button
Cover
SMART/
LEARN
Button
Advertisement
