Advertisement
11
Replacement
Parts
Contact your distributor
for information:
1PC Set of CR2 Lithium Battery
BAT-LIT750
Pressure Switch
Maintenance
1.
Maintain the metal surface of the Flashlight and Laser Combo by removing any dirt
or sand with a soft brush to avoid scratching the finish.
2.
Store the system in a cool dry place when not in use. Be careful to avoid contact
with acid, alkaline or corrosive chemicals.
3.
Removed the batteries when not in use. This insures good working batteries for
your system and prevents battery leakage.
4.
Do not store your system in high temperatures. This would damage your laser sight
and may result in battery leakage.
5.
Do not put the flashlight head against any surface especially paper or human skin
for it has heat and may result in accidents.
6.
Do not leave your system under the seat in your car, or in direct sunlight to avoid
over-heating.
7.
Make sure that power is at off position before storing it away.
8.
Do not attempt to lubricate any part of the system.
9.
Do not disassemble the system other than replacing light bulb or pressure switch.
Do not loosen or remove screws or parts. Any such or similar actions will void the
warranty.
10.
For laser products, service is only to be handled by authorized factory trained
technicians. There is no product service or user serviceable parts allowed by the
customer.
12
Advertisement
