Download Print this page
LEGRAND 7 521 90 Quick Start Manual
LEGRAND 7 521 90 Quick Start Manual

LEGRAND 7 521 90 Quick Start Manual

Connected roller shutter switch

Advertisement

Quick Links

Connected roller shutter switch
7 521 90 - 7 522 90 - 7 523 90
This pack is a connected accessory which requires you to buy and install the Valena Life
with Netatmo connected starter pack first.
Pack contents
Connected roller shutter
Site protection
switch
Characteristics
+ 45°C
+ 5°C
100-240 VAC
1 x 2,5 mm2
50/60 Hz
2 x 1,5 mm2
240 VAC max.
100 VAC max.
Finishing plate
Roller shutter motor
1 x 500 VA
1 x 270 VA
Before you start
If you plan to install roller shutter switches, read the following precautions:
To control a roller shutter switch with two or more wireless switches,
only use the products:
x 1
Connected roller shutter switch
Ensure you have roller shutters wireless switches for each additional control point.
To create a centralised control:
- Use one or more connected roller shutter switches.
- Use a roller shutters wireless switch.
AND
x 1
or several
Roller shutters wireless switch
(not included in this pack)
2

Advertisement

loading

Summary of Contents for LEGRAND 7 521 90

  • Page 1 Connected roller shutter switch Before you start 7 521 90 - 7 522 90 - 7 523 90 If you plan to install roller shutter switches, read the following precautions: This pack is a connected accessory which requires you to buy and install the Valena Life To control a roller shutter switch with two or more wireless switches, with Netatmo connected starter pack first.
  • Page 2 Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel Wire the connected roller shutter switch trained and approved by Legrand.

This manual is also suitable for:

7 522 907 523 90