[Attachment: Power-On External I/O Signal Timing Chart] - Daikin SUT Series Operation Manual

SE-04753

[Attachment: Power-ON External I/O Signal Timing Chart]

When parameter [P08] is "0"
1.
1-1 When the pressure switch function is not used
Power supply (200V)
Start/stop signal
Alarm/Warning
L: Abnormal
Pressure switch
L: Activated
(Relay output)
Pressure
Mode
Display
1-2 When the pressure switch function is used
Power supply (200V)
Start/stop signal
Alarm/Warning
L: Abnormal
Pressure switch
L: Activated
(Relay output)
Pressure
Mode
Display
1-3 When the pressure switch function is used (Stop at power-ON)
Power supply (200V)
Start/stop signal
Alarm/Warning L: Abnormal
Pressure switch
L: Activated
(Relay output)
Pressure
Mode
Display
[Operation Manual]
3 sec. max. 0.2 sec. average
Magnetic pole detection
Charging
Actual pressure display
Pressure switch setting
3 sec. max. 0.2 sec. average
Charging Magnetic pole detection
Actual pressure display
H: Stop command
Pressure switch setting
3 sec. max.
Standby for operation
Charging
DAIKIN INDUSTRIES, LTD.
L: Operation command
H: Normal
Normal control
Actual pressure display
L: Operation command
H: Normal
H: Normal pressure condition
Normal control
Actual pressure display
H: Normal
H: Normal pressure condition
0.2 sec. average
Magnetic pole
detection
* Magnetic pole detection will be executed at the first motor startup after power-ON.
H: Stop command
Actual pressure display
H: Stop command
The output may be unstable
depending on the relationship
between the pressure switch
setting and delay time.
Actual pressure display
L: Operation command
The output may be unstable depending on the relationship
between the pressure switch setting and delay time.
Normal control
Actual pressure display
42/49