[11. Operation Panel Operating Procedure]; Outline Of Functions; Description On Individual Modes; Shift Between Individual Modes - Daikin SUT Series Operation Manual

SE-04753

[11. Operation Panel Operating Procedure]

This hydraulic unit enables you to monitor or change pressure, flow rate or other parameter settings by operating the
controller key switches.

Outline of functions

The operation panel is comprised of the 3-digit LED
key . Normally, the panel shows an actual pressure value. It can be switched between the monitor display mode
and set value display mode through key operations.
(MODE key)

Description on individual modes

Normal mode: Displays an actual pressure value or alarm code.
Monitor mode: Displays a pressure switch set value, pressure set value, flow rate set value, actual flow rate, and
actual rpm.
Setting mode: Used to set or change a parameter such as pressure and flow rate.
Alarm mode: Alarm records can be checked.

Shift between individual modes

Key switch operations for shift between individual modes are shown below:
Press
Press
Monitor mode
[Operation Manual]
key
Power-ON
Normal mode
Press
Setting mode
DAIKIN INDUSTRIES, LTD.
, mode key , setting keys
keys
(Setting keys)
Keep pressing
simultaneously for at least two seconds.
Keep pressing and
simultaneously for at least two seconds.
25/49
and ENT
3-digit LED
key
(ENT key)
and
Press
Alarm mode