Page 1
Product Code: ER12D-1 INSTALLATION/OPERATION INSTRUCTIONS Single Speed Heat Transfer HEAT TRANSFER CONTROLLER FOR USE WITH SINGLE SPEED FAN Increase key : adjust temperature and value Setting key Decrease key : adjust temperature and value Turn ON/OFF For your safety please follow the installation and operating instructions...
Page 2
BEFORE YOU START Weiss DIGITAL HEAT TRANSFER CONTROLLER must not be mounted in areas subject to direct splashing. Refer to New Zealand standard NZECP2: 1988 Section 4.6 and Australian Standard AS3000:1991, Section 6.2. SAFETY NOTE...
Page 3
Replace the cover by placing over the metal clips located on the base and slide in a downward direction. Note: Do not use excessive force to fit the cover. HOW TO CONNECT UP A WEISS ER12D-1 DIGITAL CONTROLLER The LIVE line in is connected to terminal 1 (L) at the rear of the control unit.
Page 4
All relevant AS/NZS standards • The unit should be checked annually for correct operation. • This controller has been designed to work with Weiss Heat Transfer AC Fans only. Weiss Limited, 20b Arwen Place, East Tamaki PO Box 204-120 Highbrook Auckland New Zealand Web: www.weiss.co.nz...
Need help?
Do you have a question about the ER12D-1 and is the answer not in the manual?
Questions and answers
How do I update the date and time?