Table of Contents
Advertisement
2.5
Storage devices
The server system supports eight (8) 3.5-inch Serial ATA hard disk drives or eight (8) 2.5-inch
SSD drives via the storage device trays, or an optional four (4) NVME drives via the bottom
four storage device trays.
•
Support for the optional four (4) NVME is optional and is purchased separately.
•
The storage devices are purchased separately.
Installing 3.5-inch storage devices
To install 3.5-inch storage devices:
Remove the side cover of the chassis. Refer to the Removing the side cover section
1.
for more information.
2.
Prepare the 3.5-inch storage device and the bundled set of screws.
3.
Press and hold the storage device tray latch from both sides, then pull the storage
device tray out from the bay.
4.
Align and insert the 3.5-inch storage device into the storage device tray ensuring that
the screw holes on the storage device matches the HDD notches on the storage device
bay. Ensure the storage device is seated firmly in the storage device bay.
HDD notches (Storage device tray)
ASUS E900 G4
Screw holes (HDD)
2-11
Advertisement
Table of Contents
