5.
Remove the metal cover of the passive fan
module cable slot.
Take extra care when removing the
metal cover. Use tools such as a screw
driver to bend and remove the metal
cover to avoid physical injury.
6.
Align the passive fan module to the screw holes around the expansion slots.
The passive fan module is optional.
7.
Thread the passive fan module cables through the passive fan module cable slot.
8.
Secure the passive fan module to the chassis using the bundled screws.
2-22
USB BIOS
Flashba ck
10
USB3.1
TYPE C
USB3.0
USB3.0
REAR
C/SUB
SPDIF OUT
MIC IN
LINE OUT
LINE
Chapter 2: Hardware Setup