Troubleshooting - LeapFrog leapland Adventures Instruction Manual

3. Remove the batteries if the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
5. Always keep the Wireless Controller and HDMI Game Stick away
from water.
6. Examine the Micro USB Power Cable regularly, checking for damage
to the cable, plug and other parts. Do not use the Micro USB Power
Cable if there is any damage.

TROUBLESHOOTING

If you are unable to insert the HDMI Game Stick directly into the HDMI
port on your television due to clearance issues, a third party HDMI
extension cable may be a good solution. A short HDMI extension cable
as shown below can be purchased from major electronics retailers.
If for some reason the unit stops working or malfunctions, please follow
these steps:
HDMI Game Stick
1. Interrupt the power supply by unplugging the USB A Connector end
of the Micro USB Power Cable from the USB port on your television
or other qualified DC 5V adapter with output no less than 500mA.
2. Unplug the HDMI Game Stick from the HDMI port on your television.
3. Wait for 10 Seconds, then plug the HDMI Game Stick into the HDMI
port on your television.
4. Plug the USB A Connector end of the Micro USB Power Cable into
the USB port on your television or other qualified DC 5V adapter
with output no less than 500mA. The unit will now be ready to
play again.
Wireless Controller
1. Interrupt the power supply by removing the batteries.
2. Let the unit stand for 10 seconds, then replace the batteries.
3. The unit will now be ready to play again.
4. If the unit still does not work, replace with an entire set of
new batteries.
9