Care And Maintenance; Troubleshooting - LeapFrog Tap-a-Peg Wooden Truck Instruction Manual

CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
5. If the unit stops working or malfunctions, install a new set
of batteries.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions,
please follow these steps:
1. Turn the unit Off
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit On
5. If the unit still does not work, install a new set of batteries.
IMPORTANT NOTE: IMPORTANT NOTE:
If the problem persists, please contact our Consumer Services
Department at 1-800-701-5327 Department
support@leapfrog.com. Creating and developing LeapFrog support@leapfrog.com.
products is accompanied by a responsibility that we take very
seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know that
we stand behind our products and encourage you to contact
us with any problems and/or suggestions you might have. A
service representative will be happy t help you.
Off.
On. The unit should now be ready to use again.
1-800-701-5327 in the U.S. and Canada, or email
Consumer Services
9