Care And Maintenance; Troubleshooting - LeapFrog Build-a-Slice Pizza Cart Instruction Manual

CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp
cloth.
2. Keep the unit out of direct sunlight and away from any
direct heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions,
please follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit On. The unit should now be ready to use
again.
5. If the unit still does not work, install a new set of batteries.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn
the power Off and back On, or remove and reinstall the
batteries. In the unlikely event of an electrostatic discharge,
the unit may malfunction and lose memory, requiring the
user to reset the device by removing and reinstalling the
batteries.
15